| Statistics |
Total online: 1 Guests: 1 Users: 0 |
|
Main » 2013 » November » 01 » Warhammer 40k Bell Tower Project-WIP Part 1 by Matthew Glanfield
5:24 AM Warhammer 40k Bell Tower Project-WIP Part 1 by Matthew Glanfield |
Warhammer 40k Bell Tower Project:WIP Part 1 by Matthew Glanfield
In our
article for today is all about building a bell tower. So lets just set aside
some of our worries and focus our mind in creating something wickedly awesome a
Warhammer 40K Bell Tower. The most important component in building a bell tower
is a brass bell which can be purchased on a dollar store which is abundant
during Christmas season. Now that we had already the brass bell we can already
ready to construct. So pull up your socks, demist your glasses and repeat after
me,�Warhammer is my life�. Did I say that out loud? Anyway, let�s build some
terrain.
Materials list:
� 20?x30? foam board
� utility knife
� pencil
� ruler
� popsicle sticks
� white glue
� an Ipod
playing Zeppelin and a little patience while cutting the foam board.(you�ll see
what I mean)
Step 1 Marking the Windows
I tried making a
Gothic/Imperial guard/city of death look to it. This is the part where your
artistic instinct license comes in. Feel free to design and let your mind and
basic instinct come to play in choosing your desired design of the windows Isabel Marant. Draw your
chosen design of the window on the foam board. It would be better to create a
lot of windows on your tower. It creates a more clear feeling while looking
through the building.
Step 2 Cut out your Windows
Cut out your
windows according to what you have drawn, it should be pretty strait forward.
This will test your patience sometimes cause you have drawn more windows so
expect to cut more windows too post by haiyan111. Although this is where you'll
need to bite the bullet for a good while and just cut till you are so occupied
in your work that when somebody come sup to bother you and call up your name
three times, that only the time you begin to respond cause you do not want to be
disturbed when cutting out the windows. After cutting out all the drawn windows
its better to sand the insides to have a smooth sides.
Step 3 Cut out
base
After cutting out the windows you're going to cut a base out so that
the walls have something to stick in to. You can made it just large enough to
fit two space marines along the outside of the building once in
place.
Step 4 Glue popsicle sticks
Start this by slicing popsicle
sticks width channels in each level. Next glue popsicles sticks according to its
place. These will give enough support to the structure when everything is glued
together and in order Etoile
Isabel Marant Bobby Suede Sneakers In Black. Once finished gluing all the
popsicle sticks let it sit to dry for 5-10 minutes.
Step 5 Glue structure
together
This is where we make busted up flooring. Make it so it�s able
to rest on both walls for stronger support. Hold the walls up perpendicular to
each other and glue down the floors until it dries up. This will enable the
building to stand by itself. Be sure that the wall can stand up all by itself.
Next glue supports to the base. Use the windows that were cut from the
walls.
<
|
|
Views: 342 |
Added by: ghdfs
| Rating: 0.0/0 |
|
|
|
